久久人人爽人人爽人人av东京热,精品国产sm最大网站,天下第二社区在线视频,精品亚洲国产成人蜜臀av


名稱:上海乾拓貿易有限公司
上海地址:上海市嘉定區嘉涌路99弄6號713室
聯系人;沈雪
企業QQ:2880626081
手機;18918574312(微信) 
電話;021-69000975
郵箱:18918574312@163.com


聯系人:羅丹
QQ:2880626082
直線電話:021-39526590
聯系人:羅小姐 18917038407(同微信)
郵箱:18917038407@163.com


聯系人:章瑩玲
企業QQ:2880626085
手機;18918572467(微信) 
電話;021-69000973
郵箱:18918572467@163.com


聯系人:王亞波
QQ:2880626088
021-39529839-8012
手機:17321056802(同微信)
郵箱:17321056802@163.com




產品資料

日本進口油研軸向柱塞泵優點一覽

如果您對該產品感興趣的話,可以
產品名稱: 日本進口油研軸向柱塞泵優點一覽
產品型號: DSG-03-2B2-A100-50674
產品展商: YUKEN-油研
產品文檔: 無相關文檔

簡單介紹

日本進口油研軸向柱塞泵優點一覽 or R & O (Rust and Oxidation inhibitor) type hydraulic oils e quivalent to ISO VG-32 Whenever there is fear of excessive load, please use rubber hoses. 7.Suction Piping In case the pump is installed above the oil level, the suction piping and suction line filter should be located lower than the p ump position to prevent air in the suction line. which have to be 日本進口油研軸向柱


日本進口油研軸向柱塞泵優點一覽  的詳細介紹
日本進口油研軸向柱塞泵優點一覽
上海乾拓貿易有限公司
聯系人:
企業QQ:
手 機:(微信)
電 話:
郵箱;@163.com
地址:
use the pipes of the same diametre as that of the specified pipe flange to be used.
High efficiency Under the conditions of pressure 16 MPa (2320 PSI)
or R & O (Rust and Oxidation inhibitor) type hydraulic oils e quivalent to ISO VG-32
 Whenever there is fear of excessive load, please use rubber hoses. 7.Suction Piping
In case the pump is installed above the oil level, the suction piping and suction
line filter should be located lower than the p ump position to prevent air in the suction line.
which have to be satisfied for the use of the above hydraulic oils.
 10.  The suction port must be equipped with at least a 100 μm (150 mesh) reservoir type filter
 and the return line must have a  line type filter of under 10 μm.
3.Mounting When installing the pump the filling port should be positioned upwards. 
4.Alignment of Shaft Employ a flexible coupling whenever possible,
and avoid any s tress from bending or thrust.  Maximum permissible misalignment is less than 0.1 mm
 (. 004 inches) TIR and maximum permissible misangular is less than 0.2°.
 and shorten the life of the unit.  Please maintain the degree of contamination within NAS Grade
Install drain piping according to the chart and ensure that pressure within the pump
housing should be maintained at a normal pressure of less than 0.1 MPa (14.5 PSI)
and surge p ressure of less than 0.5 MPa (72.5 PSI).  Length of piping should be less
and s peed 1800 r/min, the volumetric efficiency is over 98% and the overall efficiency is over 90%.
Low noise level In the "A16" pump, the noise level is as low as 57.3 dB(A)
[ at the full cut-off pressure 21 MPa (3050 PSI) with speed 1500 r/min one metre
(3.3 ft.) horizontally away from pump h ead cover.]
1.Hydraulic Fluids Use petroleum based oils such as anti-wear type hydraulic oils
Make s ure that the height of the pump suction port is within one m etre (3.3 ft)
 5.Suction Pressure Permissible suction pressure at inlet  port of the pump is between -16.7
 and +50 kPa (5 in.Hg Vacuum and 7 PSIG).  For piping to the suction port,
than 1 m (3.3 ft.), and the pipe end should be submerged in oil.
or 46. The recommended viscosity 2  r ange is from 20 to 400 mm /s (98 to 1800 SSU)
and temperature range is from 0 to 60° (32 to 140°F), both of
 from the oil level in the reservoir. 6.Hints on Piping When using steel pipes for the suction
or discharge ports, excessive load from the piping to the pump generates excessive noise.
2.Control of Contamination Due caution must be paid to maintaining control
 over contamination of the operating oil which can otherwise lead to b reakdowns
日本進口油研軸向柱塞泵優點一覽
Copyright@ 2003-2025  上海乾拓貿易有限公司版權所有     

Copyright@2003-2018 上海乾拓貿易有限公司版權所有 電話:021-39529830/39-8005  021-39529831/29-8002 傳真:021-39529839 

地址:上海嘉定嘉涌路99弄6號713 郵編:201812  易展提供技術支持  滬ICP備09006758號-20    網站管理入口

         滬ICP備09006758號-20   

滬公網安備 31011402005010號

點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息 點擊這里給我發消息